Luxens Water Based Plaster Primer 20L

(0 reviews)
Estimate Shipping Time: 5 Days

Inhouse product


Price
R949.00 /pc
Quantity
(55 available)
Total Price
Share

Reviews & Ratings

0 out of 5.0
(0 reviews)
There have been no reviews for this product yet.

A good, pigmented water-based primer with good hiding power and penetrating qualities suitable for application to dry, raw cement plaster, fibre cement and cement bricks with superior resistance to alkali attack and efflorescence. This primer is also suitable for use on gypsum plaster (i.e., rhinolite) that dries with a firm surface (not above powdery residue) This product has a low VOC compared to typical solvent-based plaster primers and it is easy to clean up painting equipment with water with low odor APPLICATION PROPERTIES - Product can be applied by brush, roller, or airless spray (without thinning) onto properly dry cement plaster (allow a minimum of 21 days of clear weather for plaster to dry) or rhinolite, gypsum plaster or cement board or cement bricks. Do not sand Rhinolite or Rhino glide prior to application of this product as the sandpaper will break down the firm crystal-like structure of the surface and leave a powdery residue - Ensure the surface to be painted is free of grease, grime (wash with DEGREASER, rinse thoroughly and allow to dry completely) or powdery dust or loose material (by brushing off with a stiff block brush) - This product is not to be applied onto existing paint (either water-based emulsion paint or gloss enamel paints) SUFACE PREPARATION NEW PLASTER SURFACES - Plastered surfaces to be primed, must be dry - All surfaces must be clean, dry, free from dirt or dust. (It is recommended that the plastered surface is brushed to remove dust and loose particles) - Apply 1 coat of Luxens water-based plaster Primer - Allow to dry for +/-4 hours @ 25 ° C before over coating with Luxens ® WATER-BASED TOP-COATS WARNING - This product contains a small amount of specialized resin that is difficult to remove with cold water - To clean brushes and rollers, we recommend using warm water and detergent. Keep rollers submerged in water over-night and rinse and re-use the next day while busy with the same job IMPORTANT - Stir well before use - Allow 7 days to cure before washing - Do not paint if rain is imminent or in damp conditions